TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 635 of 1555

TM9-2320-387-24-2 1528. ENGINE INSTALLATION (Cont’d) NOTE l It will be necessary to rotate flywheel clockwise from capscrew in front of crankshaft to gain access to install capscrews to torque converter. l Have assistant hold crankshaft pulley in place when installing flywheel to torque converter. 17. Align torque converter (27) to flywheel (25) and install six capscrews (26). 18. Tighten capscrews (26) to 32 lb-R (43 N-m). NOTE Gaskets may require bending over edge of converter housing cover to make gaskets seal properly. 19. Apply RTV sealant to upper converter housing cover gasket (32). Install gasket (32) and upper converter housing cover (33) on transmission (28) with four capscrews (34). 20. Apply RTV sealant to lower converter housing cover gasket (29). Install gasket (29) and lower converter housing cover (30) on transmission (28) with two capscrews (31). : UPPER 15103