TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 634 of 1555
TM 9-2320-387-24-2 1 1528. ENGINE INSTALLATION (Cont’d) I 12. Install leads 74A (4) and 74B (2) on solenoid (1) with clip (5) and screw (6). 13. Install cable 6A (15), lead 81B (lo), and winch cable 6 (7), if equipped, on starter terminal (3) with lockwasher (8) and nut (9). Using torque adapter, tighten nut (9) to 25 lb& (34 Nom). 14. Install negative cable 7A (161, lead 3D (141, and winch cable 7 (131, if equipped, on starter terminal (17) with lockwasher (12) and nut (11). Using torque adapter, tighten nut (11) to 15 lb-ft (20 Nom). 15. Install clamp (19) and negative cable 7A (15) on starter (20) with screw (18). 16. Install clamp (23) and winch cables 6 (7) and 7 (13) on oil pan bracket (211, if equipped, with capscrew (22) and nut and lockwasher assembly (24).