TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 631 of 1555
TM 9-2320-387-24-2 1 1528. ENGINE INSTALLATION (Cont’d) I 1. Lower engine (1) into vehicle. WARNING Transmission must be supported during engine installation. Failure to do this may cause injury to personnel or damage to equipment. 2. Raise and support transmission (3). 3. Install transmission (3) on engine (1) with four capscrews (4) and two studs (2). Using torque sequence shown, tighten capscrews (4) and studs (2) to 35 lb-ft.(47 N-m) 4. Align right engine mount insulator (5) on engine mount bracket (6) and install two washers (8) and locknuts (71. Repeat for left engine mount. Using torque adapter, tighten locknuts (71 to 90 lb-ft (122 Nom). TRANSMISSION TORQUE SEQUENCE 15-99