TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 625 of 1555
15-27. ENGINE PREPARATION (Cont’d) 16.1 Install mounting bracket (13) on engine (11.2) with collar washer (11.1) and capscrew (12.1). 17. Install mounting bracket (13) on water pump (12) with two lockwashers (14) and capscrews (15). NOTE On M1114 vehicles equipped with A/C, the compressor pulley is in place of the lower idler pulley. 18. Install three supports (9.1) and idler pulleys (9) on mounting bracket (13) with three dust covers (8.1), washers (8), capscrews (7), washers (8), lockwashers (10), and nuts (11). 19. Install belt tensioner (16) on mounting bracket (13) with capscrew (17). NOTE Perform step 20 for M1114 vehicles only. 20. Install spacer (19) and A/C compressor (23) on bracket (20) and mounting bracket (13) with washer (23.1), two lockwashers (21), capscrews (18), and nuts (22). TM 9-2320-387-24-2 Change 1 15-93 7 8 8.1 9 7 8 8.1 9 9.1 8 10 11 12 13 14 15 16 17 7 10 8 11 9.1 11 10 8 9 18 19 18 23 23.1 20 22 8 12.1 21 13 ~ 21 8.1 9.1 ~ 11.1 11.2 ~