TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 615 of 1555

15-27. ENGINE PREPARATION (Cont’d) Change 1 15-83 TM 9-2320-387-24-2 14 15 14 20 20.1 16 21 22 23 21 22 23 22 24 25 26 19 27 28 29 21 22 24 23.1 25 25 24 23 22 18 17 17 19 ~ 30 ~ 22 NOTE Perform step 18 for M1114 vehicles only. 18. Remove two nuts (18), lockwashers (17), capscrews (14), washer (20.1), lockwasher (17), A/C compressor (20), and spacer (15) from mounting bracket (19) and bracket (16). Discard lockwashers (7). 19. Remove capscrew (30) and belt tensioner (29) from mounting bracket (19). NOTE On M1114 vehicles equipped with A/C, the compressor pulley is in place of the lower idler pulley. 20. Remove three nuts (25), lockwashers (24), washers (22), supports (23.1), capscrews (21), washers (22), dust covers (22.1), and idler pulleys (23) from mounting bracket (19). Discard lockwashers (24). 21. Remove two capscrews (28) and lockwashers (27) from mounting bracket (19) and water pump (26). Discard lockwashers (27). 21.1. Remove screw (26.1), collar washer (25.1), and mounting bracket (19) from engine (25.2). 26.1 23.1 23.1 25.1 25.2 22.1 22.1 22.1