Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 586 of 1555

TM 9-2320-387-24-2 1526. ENGINE REMOVAL (Cont’d) I 21. 22. 23. 24. 25. 26. 27. Remove four capscrews (15), washers (13), and lockwashers (14) from plate (12) and splash shield bracket (6). Discard lo&washers (14). Remove two hex-head screws (lo), plate (12), and spring nuts (11) from headlight homing (9). Remove four nuts (29), screws (28), and harness connector (30) from Plate (12). &move locknut (ES), washer (7), capscrew (18), and washer (17) from right splash shield (1) and support bracket (16). Discard locknut (8). NOTE Perform steps 25 and 26 for Ml113 models only. Remove locknut (23). washer (24), washer (22), two capscrews (19), washers (20), and chmP (21) from right splash shield (1) and airI% bracket (5). Discard locknut (23). Remove locknut (26), washer (25), capscrew (2), and vent line clamp (27) from right splash shield (1). Discard locknut (26). Remove screw (3), washer (4), and right splash shield (1) from airlift bracket (5).