TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 566 of 1555
TM9-2320-387-24-2 I I 15-l 7. RIGHT INTAKE MANIFOLD REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Equipment Condition l Air horn removed (para. 3-14). l Intake crossover removed (para. 15-20). l CDR valve and bracket removed (para. 3-9). l Wastenate actuator removed (para. 15-19). Intake manifold gasket (Appendix G, Item 75) Manual References TM 9-2320-387-24P Maintenance Level Direct support a. Removal 1. Remove eight intake manifold studs (2) from intake manifold (I). 2. Remove intake manifold (1) and gasket (4) from cylinder head (3). Discard gasket (4). 3. Clean mating surfaces of cylinder head (3) and manifold (1). b. Installation 1. Install gasket (4) and intake manifold (1) on cylinder head (3) with eight studs (2). 2. Tighten studs (2), beginning at center of intake manifold (1) and working toward (41 N-m). ends, to 30 lb-R FOLLOW-ON TASKS: l Install wastegate actuator (para. 15-19). l Install CDR valve and bracket (para. 3-9). l Install intake crossover (para. X-20). l Install air horn (para. 3-14). 15-34