TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 561 of 1555
TM 9-2320-387-24-2 15 14. OIL PUMP DRIVE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Gasket (Appendix G, Item 80) Manual References TM 9-2320-387-24P Equipment Condition l Battery ground cables disconnected (para. 4-68). l Turbocharger removed (para. 15-21). Maintenance Level Direct support NOTE Prying may be performed around head of oil pump drive to assist in loosening oil pump drive for removal. 1. Remove capscrew’(2) and clamp (3) from engine cylinder block (4). 2. Remove oil pump drive (1) and gasket (5) from engine cylinder block (4). Discard gasket (5). Install gasket (5) and oil pump drive (1) in engine cylinder block (4). Secure oil pump drive (1) to engine cylinder block (4) with clamp (3) and capscrew capscrew (2) to 25-37 lb-ft (34-50 N-m). (2). Tighten FOLLOW-ON TASKS: l Install turbocharger (para. 15-21). l Connect battery ground cables (para. 4-68). 15-29