TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 56 of 1555
TM 9-2320-387-24-2 10-23. ENGINE LEFT SPLASH SHIELD MAINTENANCE (Cont’d) 1. Remove three locknuts (7), washers (81, capscrews (lo), and bracket (9) from left splash shield (11. Discard locknuts (7). 2. Remove five locknuts (61, washers (51, capscrews (131, seal retainer (121, and seal (11) from splash shield (1). Discard locknuts (6). NOTE For rivet replacement instructions, refer to para. 10-56. 3. Remove four rivets (31, support (41, and reinforcement (2) from splash shield (1). Discard rivets (3). 1 c. Assembly 1 1. Install support (4) and reinforcement (2) on left splash shield (1) with four rivets (3). 2. Install seal (11) and seal retainer (12) on splash shield (1) with five capscrews (13), washers (5), and locknuts (6). 3. Install bracket (9) on splash shield (1) with three capscrews (101, washers (8), and 1oFknuts (7). 1 O-40