TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 510 of 1555
TM9-2320-387-24-2 13-8. REPAIR, PAINTING, AND PRESERVATION & All equipment deficiencies noted during inspections should be repaired in accordance with vehicle TMs. b. All unpainted metal surfaces must be protected during storage or shipment. Inspect, clean, and spot- paint metal surfaces as required in TM 9-2320-387-10. Unpainted exposed machined surfaces must be prepared with corrosion-preventive compounds or oil and grease as referenced in TM 9-2320-387-10. Be sure to select preservatives that will not harm vehicle interior components. c. Sunlight, heat, moisture, and dirt accelerate deterioration. Install all covers authorized for the equipment. Close and secure all openings except those required for venting and drainage. Seal all openings to prevent the entry of rain, snow, or dust. d. Inflate tires to a maximum of 30 psi (207 kPa). 13-9. LUBRICATION Lubricate vehicles in accordance with TM 9-2320-387-10 before shipment or storage. 13-l 0. RECORDS AND REPORTS Maintenance records required by AR 750-l wiIl be maintained and reports submitted in accordance with DA Pam 738-750 and AR 220-l. 13-3/( 13-4 blank)