TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 507 of 1555

TM 9-2320-387-24-2 I 12-49. EXHAUST REINFORCEMENT BRACKET REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Manual References Ml113 TM 9-2320-387-24P Tools Equipment Condition General mechanic’s tool kit: Deep water fording kit exhaust assembly removed automotive (Appendix B, Item 1) (para. 12-38). hlaterials/Parts Maintenance Level Eight locknuts (Appendix G, Item 109) Unit 1 a. Removal 1 1. Remove two isolators (4) from wheelhouse (3) and reinforcement bracket (5). 2. Remove eight locknuts (61, washers (11, capscrews (2), washers (11, and reinforcement bracket (5) from wheelhouse (3). Discard locknuts (6). I b. Installation I . 1. 2. Install reinforcement bracket (5) on wheelhouse (3) with eight washers (11, capscrews (21, washers (11, and locknuts (6). Tighten capscrews (2) to 6 lb-ft (8 N-m). Install two isolators (4) on wheelhouse (3) and reinforcement bracket (5). FOLLOW-ON TASK: Install deep water fording kit exhaust assembly (para. 12-38). 12-84