TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 505 of 1555
I 12-47. SENSOR CUP VENT LINE REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Ml113 Tools Manual References TM 9-2320-387-10 TM 9-2320-387-24P General mechanic’s tool kit: automotive (Appendix B, Item 1) Equipment Condition l Hood raised and secured (TM 9-2320-387-10). l Engine access cover removed (para. 10-22). Maintenance Level Unit 1 a. Removal 1 1. Loosen clamp (3) and disconnect sensor cup vent line (1) from CDR valve (2). 2. Loosen clamp (6) and remove vent line (1) from sensor cup (5). 3. Remove two clamps (3) and (6) from vent line (1). b. Installation 1. Install two clamps (3) and (6) on vent line (1). 2. Route vent line (1) through A-beam (4). 3. Connect vent line (1) to sensor cup (5) with clamp (6). 4. Connect vent line (1) to CDR valve (2) with clamp (3). FOLLOW-ON TASKS: l Install engine access cover (para. 10-22). l Lower and secure hood (TM 9-2320-387-10). 12-82