TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 503 of 1555
TM 9-2320-387-24-2 I 12-45. HYDRO-BOOST VENT LINE REPLACEMENT ~~ 1 This task covers: a. Removal b. Installation INITIAL SETUP: Applicable hlodels Ml113 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hIaterials/F’arts Locknut (Appendix G, Item 1541 Nut and lockwasher assembly (Appendix G, Item 244) hlanual References TM 9-2320-387-24P Equipment Condition Engine left splash shield removed (para. 10-231. Maintenance Level Unit pI7ciGq 1. Disconnect hydro-boost vent line (21 from hydro-boost (1). 2. Remove nut and lockwasher assembly (31, capscrew (101, clamp (41, harness clamp (91, and vent line (21 from body (11). Discard nut and lockwasher assembly (3). 3. Remove locknut (61, washer (71, capscrew (81, washer (71, clamp (51, and vent line (2) from body (11). Discard locknut (61. 4. Remove two clamps (4) and (5) from vent line (2). b. Installation 1. Install two clamps (4) and (51 on vent line (2). 2. Install vent line (2) and clamp (5) on body (11) with washer (71, capscrew (81, washer (71, and locknut (6). Tighten capscrew (8) to 6 lb-ft (8 Nom). 3. Install vent line (21, harness clamp (91, and clamp (4) on body (11) with capscrew (10) and nut and lockwasher assembly (3). 4. Connect vent line (2) to hydro-boost (1). FOLLOW-ON TASK: Install engine left splash shield (para. 10-23). i 2-80