TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 502 of 1555

TM 9-2320-387-24-2 12-44. CDR VALVE VENT LINE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Ml113 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two tiedown straps (Appendix G, Item 462) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit 1. Loosen clamp (2) and disconnect CDR valve vent line (3) from CDR valve (1). 2. Remove two tiedown straps (5) from vent line (31 and existing hoses (6) on A-beam (4). Discard tiedown straps (5). 3. Loosen clamp (2) and remove vent line (3) from elbow (8) on selector valve (7). 4. Remove clamps (2) from vent line (3). b. Installation 1. Install clamps (2) on vent line (3). 2. Connect vent line (3) to elbow (8) on selector valve (7) with clamp (2). 3. Install vent line (3) along A-beam (4) on existing hoses (6) with two tiedown 4. Connect vent line (3) to CDR valve (1) with clamp (2). straps (5). FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-101. 12-79