TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 499 of 1555
TM 9-2320-387-24-2 12-42. FUEL TANK VENT STACK TUBE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Ml113 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 229) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit 1 a. Removal 1 1. Disconnect fuel tank vent line (8) from fuel tank vent stack tube (2). 2. Remove nut (lo), screw (7), lockwasher (91, and clamp (6) from fuel tank vent stack tube (2) and air intake assembly (1). Discard lockwasher (9). 3. Remove screw (51, lockwasher (41, fuel tank vent stack tube (21, and clamp (3) from air intake assembly (1). Discard lockwasher (4). b. Installation 1. Install fuel tank vent stack tube (2) and clamp (3) on air intake assembly (1) with lockwasher (4) and screw (5). 2. Install fuel tank vent stack tube (2) and clamp (6) on air intake assembly (1) with lockwasher (91, screw (7), and nut (10). 3. Connect vent line (8) to vent stack tube (2). FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). 12-76