TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 488 of 1555
TM 9-2320-387-24-2 12-68.26 Change 1 12-36.6. 10,500 LB REAR HYDRAULIC WINCH CONTROLLER PLUG REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1114 Tools General mechanics tool kit: automotive (Appendix B, Item 1) Materials/Parts Three tiedown straps (Appendix G, Item 463) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Battery ground cables disconnected (para. 4-68). Maintenance Level Unit 1. Remove three tiedown straps (2) from lead wire (4), controller plug harness (3), valve assembly wires (5), and body wiring harness (1). Discard tiedown straps (2). 2. Disconnect controller plug lead 785C (14) from valve assembly lead 785C (13). 3. Disconnect controller plug lead 785B (10) from circuit breaker (15). 4. Disconnect controller plug lead 785A (11) from valve assembly lead 785A (12). 5. Remove four screws (7) and controller plug (6) with cap and chain (8) from body panel (9). 6. Remove controller plug harness (3) from around fuel filter (17) and back through hole in body panel (16). a. Removal