TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 481 of 1555
TM 9-2320-387-24-2 Change 1 12-68.19 12-36.4. 10,500 LB REAR HYDRAULIC WINCH HOSE REPLACEMENT (Cont'd) 13. Connect hydraulic hose assembly (13) to port 3 elbow (12) on valve assembly (11). 14. Route hydraulic hose assembly (13) from port 3 elbow (12) under valve assembly (11). NOTE • Ensure area around hydro-boost and power steering gear port is clean before installing power steering hose assembly. • Lubricate O-rings with Dexron III® prior to installation. 15. Install O-ring (14) on hydraulic hose assembly (13) and connect hydraulic hose assembly (13) to hydro-boost (15). 16. Connect hydraulic hose assembly (9) to port 1 elbow (10) on valve assembly (11). 17. Route hydraulic hose assembly (9) from port 1 elbow (10) on valve assembly (11) along left inner cowl to power steering gear port (17). 18. Install O-ring (16) on hydraulic hose assembly (9) and connect hydraulic hose assembly (9) to power steering gear port (17). ~ 11 10 9 12 13 16 17 14 15 FOLLOW-ON TASKS: • Connect battery ground cables (para. 4-68). • Bleed power steering system (para. 8-27). • Install engine left splash shield (para. 10-23).