TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 461 of 1555
TM 9-2320-387-24-2 12-35. REAR FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT This task covers: a. Removal INITIAL SETUP: b. Installation Applicable Models Ml114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 130) Manual References TM 9-2320-387-24P General Safety Instructions Wear leather gloves when handling winch cable, Maintenance Level Unit WARNING Gloves must be worn when handling winch cable. Failure to do so may cause severe injury to personnel. I a. Removal I 1. Remove four retaining rings (61, two shafts (51, and rollers (4) from bracket (10). 2. Remove four retaining rings (71, two shafts (91, and rollers (8) from bracket (10). 3. Remove two locknuts (111, washers (21, capscrews Cl), washers (2), and bracket (10) from frame (3). Discard locknuts (11). rYzzzz-1 1. 2. Install two rollers (8) and shafts (9) on bracket (10) with four retaining rings (7). 3. Install two rollers (4) and shafts (5) on bracket (10) with four retaining rings (6). Install bracket (10) on frame (3) with two washers (21, capscrews (11, washers (21, Tighten locknuts (11) to 35 lb-ft (47 N-m). and locknuts (111, 12-67