TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 439 of 1555
TM 9-2320-387-24-2 1 12-30. FRONT FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT I This taskcovers: a. Removal b. Installation INITIAL SETUP: ApplicableModels Ml113 ToOlS General mechanic’s tool kit: automotive (Appendix B, Item 1) ManualReferences TM 9-2320-387-24P GeneralSafety Instructions Winch must be supported during removal and installation. Maintenance Level Unit WARNING Winch must be supported during removal and installation. Failure to support winch may result in injury to personnel or damage to equipment. pYYizzq I. Remove four retaining rings (8), two shafts (7), and rollers (9) from bracket (6). 2. Remove four retaining rings (4), two shafts (3), and rollers (10) from bracket (6). 3. Remove two capscrews (l), washers (2), and bracket (6) from bumper (5). -1 I. Install bracket (6) on bumper (5) with two washers (2) and capscrews (1). Tighten capscrews (I) to 35 lb-f% (47 Nom). 2. Install two rollers (10) and shafts (3) on bracket (6) with four retaining rings (4). 3. Install two rollers (9) and shafts (7) on bracket (6) with four retaining rings (8). 1249