TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 411 of 1555
TM 9-2320-387-24-2 t 12-22. REAR ANTENNA MOUNTING BRACKET REPLACEMENT I Thii task covers: a. Removal INITIAL SETUP: b. Installation Applicable Models Ml113 TOOIS General mechanic’s tool kit: automotive (Appendix B, Item 1) Special Tools Manual References TM 9-2320-387-24P Equipment Condition l AS 1729/VRC antenna removed (para. 12-211, if installed. l AB-652/GR antenna removed (para. 12-231, if installed. Crowfoot, 3/B-in. (Appendix B, Item 142) Socket adapter, 3/8-in. (Appendix B, Item 135) M:ztenance Leve’ Materials/Parts Three locknuts (Appendix G, Item 179) 1 a. Removal 1 1. Remove grommet (3) from body (1). NOTE Note position of washers and clamp for installation. 2. Remove three locknuts (B), washers (7), capscrews (41, washers (51, antenna mounting bracket (21, and clamp (6) from body (1). Discard ~OC~IU~S (8). b. Installation 1. Install antenna mounting bracket (2) and clamp (6) on body (1) with three washers (51, capscrews (4), washers (71, and locknuts (8). Using crowfoot, tighten locknuts (8) to 15 lb-ft (20 Nem). -2. Install grommet (3) on body (1). FOLLOW-ON TASKS: l Install AS 1729NRC antenna (para. 12-211, if removed. l Install AB-652/GR antenna (para. 12-23), if removed. 12-38