TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 405 of 1555
12-18. TERMINAL BOARD REPLACEMENT This task covers: a. Removal b. Installation NOTE Tag all leads for installation. 1. Loosen two terminal lugs (2) and remove cover (1) from terminal board (10). 2. Remove nut (15), lockwasher (14), washer (13), and three leads (12) from positive post (9) of terminal board (10). Discard lockwasher (14). 3. Remove nut (3), lockwasher (4), washer (5), and three leads (6) from negative post (8) of terminal board (10). Discard lockwasher (4). 4. Remove three screws (11) and terminal board (10) from support bracket (7). INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealing compound (Appendix C, Item 70) Manual References TM 9-2320-387-24P Equipment Condition Battery ground cables disconnected (para. 4-68). Maintenance Level Unit b. Installation NOTE Apply sealant compound to negative and positive posts on terminal board. 1. Install terminal board (10) on support bracket (7) with three screws (11). 2. Install three leads (6) on negative post (8) of terminal board (10) with washer (5), lockwasher (4), and nut (3). 3. Install three leads (12) on positive post (9) of terminal board (10) with washer (13), lockwasher (14), and nut (15). 4. Install cover (1) on terminal board (10) and tighten two terminal lugs (2). TM 9-2320-387-24-2 12-32 Change 1 a. Removal