TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 403 of 1555
TM 9-2320-387-24-2 12-30 Change 1 12-17. RADIO RACK AND MOUNTING BRACKETS REPLACEMENT (Cont’d) b. Installation 1. Position three spacers (18) and support bracket (17) on tunnel floor (16) and install with three washers (24), lockwashers (23), and capscrews (22). 2. Install two brackets (13) on support bracket (17) with four washers (19), lockwashers (20), and capscrews (21). Tighten capscrews (21) to 8 lb-ft (11 N•m). 3. Install two brackets (5) on A-beam (10) with two washers (7) and capscrews (8). Tighten capscrews (8) to 6 lb-ft (8 N•m). 4. Install headphone mounting bracket (27) on radio rack (1) with two screws (28), washers (26), and locknuts (25). Tighten locknuts (25) to 6 lb-ft (8 N•m). 5. Install radio rack (1) on two brackets (13) with two capscrews (12), washers (15), and locknuts (14). Tighten locknuts (14) to 8-10 lb-ft (11-14 N•m). NOTE Perform steps 6 and 7 for M1114 vehicles. 6. Install rifle mounting clamp (31) on bracket (30) with two capscrews (32) and locknuts (33). 7. Install bracket (30) with rifle mounting clamp (31) and radio rack (1) on two brackets (5) with four capscrews (3), washers (4), and locknuts (6). NOTE Perform steps 8 and 9 for M1113 vehicles. 8. Install radio rack (1) on two brackets (5) with four washers (4), capscrews (3), washers (4), and locknuts (6). 9. Install cables (29) and two clamps (9) on radio rack (1) with two screws (2) and nut and lockwasher assemblies (11).