TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 401 of 1555
TM 9-2320-387-24-2 12-28 Change 1 12-17. RADIO RACK AND MOUNTING BRACKETS REPLACEMENT (Cont’d) a. Removal NOTE Perform steps 1 and 2 for M1113 vehicles. Perform steps 3 and 4 for M1114 vehicles. 1. Remove two nut and lockwasher assemblies (11), screws (2), clamps (9), and cables (29) from radio rack (1). Discard nut and lockwasher assemblies (11). 2. Remove four locknuts (6), washers (4), capscrews (3), and washers (4) from two brackets (5) and radio rack (1). Discard locknuts (6). 3. Remove four locknuts (6), capscrews (3), washers (4), radio rack (1), and bracket (30) with rifle mounting clamp (31) from two brackets (5). Discard locknuts (6). 4. Remove two locknuts (33), capscrews (32), and rifle mounting clamp (31) from bracket (30). Discard locknuts (34). 5. Remove two locknuts (14), washers (15), capscrews (12), and radio rack (1) from two brackets (13). Discard locknuts (14). 6. Remove two locknuts (25), washers (26), screws (28), and headphone mounting bracket (27) from radio rack (1). Discard locknuts (25). 7. Remove two capscrews (8), washers (7), and brackets (5) from A-beam (10). 8. Remove four capscrews (21), lockwashers (20), washers (19), and two brackets (13) from support bracket (17). Discard lockwashers (19). 9. Remove three capscrews (22), lockwashers (23), washers (24), support bracket (17), and three spacers (18) from tunnel floor (16). Discard lockwashers (23).