TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 389 of 1555
TM 9-2320-387-24-2 12-14 Change 1 12-8. ENGINE/CREW COMPARTMENT HEATER FUEL LINES REPLACEMENT (Cont'd) 1. Remove four screws (3), lockwashers (2), washers (1), and access cover (4) from tunnel (6). Discard lockwashers (2). 2. Disconnect fuel line (7) from in-tank fitting (5) on fuel tank (8). 3. Remove hose clamps (16) and (18), fuel hose (17), screw (9), two clamps (10), and fuel line (7) from fuel tank (8). 4. Remove hose clamps (12) and (14), union (15), and hose section (13) from fuel pump (11). 1. Install hose section (13) on fuel pump (11) and union (15) with clamps (12) and (14). 2. Install fuel hose (17) on union (15) and fuel line (7) with clamps (18) and (16). 3. Connect fuel line (7) to in-tank fitting (5) on fuel tank (8). 4. Install two clamps (10) on fuel line (7) and fuel tank (8) with screw (9). 5. Install access cover (4) on tunnel (6) with four washers (1), lockwashers (2), and screws (3). c. Tank Fuel Line and Supply Tube Removal d. Tank Fuel Line and Supply Tube Installation NOTE Fuel line replacement for the M1114 requires fuel tank removal to provide access (para. 3-25).