TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 37 of 1555
10-12. CENTER HOOD STOP REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two capscrews (1), washers (2), center hood stop (3), and plate (4) from A-beam (5). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit b. Installation Install center hood stop (3) and plate (4) on A-beam (5) with two washers (2) and capscrews (1). Tighten capscrews (1) to 12 lb-ft (16 N•m). FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). TM 9-2320-387-24-2 Change 1 10-21 2 3 4 1 5