TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 366 of 1555
11-86. CONDENSER FAN ACCESS PANEL MAINTENANCE This task covers: a. Removal c. Installation b. Inspection 1. Remove three capscrews (9), washers (8), and bracket (7) from access panel (2). 2. Remove capscrew (9.1) and washer (9.2) from access panel (2). 3. Remove three self-tapping screws (4), washers (3), and access panel (2) from condenser tray (11) and cargo shell (1). 4. Remove two screws (6) and footman loop (5) from access panel (2). Refer to para. 10-56 for plusnut (10) inspection and replacement. 1. Install footman loop (5) on access panel (2) with two screws (6). 2. Install access panel (2) on condenser tray (11) and cargo shell (1) with three washers (3) and self-tapping screws (4). 3. Apply sealing compound to threads of capscrews (9), and install bracket (7) on access panel (2) with three washers (8) and capscrews (9). Tighten capscrews (9) to 10 lb-ft (14 N•m). 4. Apply sealing compound to threads of capscrew (9.1), and install washer (9.2) and capscrew (9.1) on access panel (2). Tighten capscrew (9.1) to 10 lb-ft (14 N•m). c. Installation b. Inspection a. Removal INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-24P Materials/Parts Sealing compound (Appendix C, Item 72.1) Equipment Condition • Condenser fan exhaust vents removed (para. 11-85). • Cargo shell door gas spring mounting bracket removed (para. 11-29). Maintenance Level Unit TM 9-2320-387-24-2 11-154 Change 1