TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 364 of 1555
11-85. CONDENSER FAN EXHAUST AND SUPPLY VENT MAINTENANCE This task covers: a. Exhaust Vents Removal d. Exhaust Vents Installation b. Supply Vents Removal e. Supply Vents Installation c. Inspection Remove fifteen screws (3), lockwashers (3.1), washers (3.2), and three A/C exhaust vents (2) from cargo shell (1). Discard lockwashers (3.1). Remove twelve screws (6), lockwashers (6.1), washers (6.2), two A/C supply vents (5), and screen (4) from cargo shell (1). Discard lockwashers (6.1). Refer to para. 10-56 for plusnut (7) inspection and replacement. Apply sealing compound to threads of fifteen screws (3), and install three A/C exhaust vents (2) on cargo shell (1) with fifteen washers (3.2), lockwashers (3.1), and screws (3). Tighten screws (3) to 36 lb-in. (4 N•m). Apply sealing compound to threads of twelve screws (6), and install screen (4) and two A/C supply vents (5) on cargo shell (1) with twelve washers (6.2), lockwashers (6.1), and screws (6). Tighten screws (6) to 36 lb-in. (4 N•m). e. Supply Vents Installation d. Exhaust Vents Installation c. Inspection b. Supply Vents Removal a. Exhaust Vents Removal INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 72.1) Twenty-seven lockwashers (Appendix G, Item 200) Manual References TM 9-2320-387-24P Maintenance Level Unit TM 9-2320-387-24-2 11-152 Change 1