TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 362 of 1555

TM 9-2320-387-24-2 1 l-84. A/C TOGGLE SWITCH AND HARNESS REPLACEMENT This task covers: a. Removal INITIAL SETUP: b. Installation Applicable Models Manual References Ml114 TM 9-2320-387-24P Tools General mechanic’s tool hit: automotive (Appendix B, Item 1) Equipment Condition Battery ground cables disconnected (para. 4-68). Maintenance Level unit NOTE Prior to removal, tag leads for installation. 1. Remove register (1) from air distribution duct (5) by carefully prying out. 2. Remove nut (7) from toggle switch (9). 3. Remove toggle switch (9) from air distribution duct (5) and route toggle switch (9) through register opening (6). 4. Remove two screws (8) and leads (10) from toggle switch (9). 5. Disconnect harness connector (2) from connector (3) and remove harness (4) from air distribution duct (5). 1. Position harness (4) in air distribution duct (5). 2. Install two leads (10) on toggle switch (9) with two screws (8). 3. Install toggle switch (9) on air distribution duct (5) with nut (7). 4. Install register (1) on air distribution duct (5) by carefully pushing in place. 5. Connect harness connector (2) to connector (3). 1 l-150