TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 36 of 1555
10-11. SIDE HOOD STOP REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Two locknuts (Appendix G, Item 109) Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). TM 9-2320-387-24-2 10-20 Change 1 1 2 3 ~ 4 5 6 NOTE M1114 vehicles are equipped with plusnuts/tapping blocks instead of nuts and washers. Remove two locknuts (6), washers (5), capscrews (3), washers (2), and side hood stop (1) from body (4). Discard locknuts (6). NOTE M1114 vehicles are equipped with plusnuts/tapping blocks instead of nuts and washers. Apply sealing compound to threads of capscrews at installation for M1114 vehicles only. Install side hood stop (1) on body (4) with two washers (2), capscrews (3), washers (5), and locknuts (6). Tighten capscrews (3) to 6 lb-ft (8 N•m). b. Installation a. Removal