TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 350 of 1555
TM 9-2320-387-24-2 11-76. SHELTER SUPPORT REINFORCEMENT REPLACEMENT This task covers: a. Removal b. Imtallation INITIAL SETUP: Applicable Models Ml113 Tools Manual References TM 9-2320-387-10 TM 9-2320-387-24P General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) MaterialdParts Two capscrews (Appendix G, Item 18) Two lockwashers (Appendix G, Item 225) Equipment Condition Tailgate lowered (TM 9-2320-387-10). Maintenance Level Unit 1 a. Removal 1 NOTE . It may be necessary to detach cab rear panel straps and turnbuttons and roll cab rear panel upward to gain access to front support reinforcements. . Note number and location of shims prior to removal for installation. Remove two capscrews (71, lockwashers (61, washers (51, reinforcement (41, and shims (31, if present, from mounting bracket (2) and support assembly (1). Discard capscrews (7) and lockwashers (6). b. Installation Install shims (31, if removed, and reinforcement (4) on support assembly (1) and mounting bracket (2) with two washers (5), lockwashers (61, and capscrews (7). Tighten capscrews (7) to 90 lb-ft (122 Nom). FOLLOW-ON TASK: Raise and secure tailgate (TM 9-2320-387-10). 11-137