TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 348 of 1555
TM 9-2320-387-24-2 1 l-74. SHELTER CARRIER TAILGATE BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Ml113 Manual References TM 9-2320-387-24P Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Equipment Condition Shelter carrier tailgate removed (para. 11-75). Maintenance Level Unit Four locknuts (Appendix G, Item 134) NOTE Replacement procedures for right and left tailgate brackets are basically the same. This procedure covers the right tailgate bracket. IJ 1. Remove locknut (7), washer (6), capscrew (51, and washer (6) from tailgate bracket (8) and shelter support assembly (3). Discard locknut (71. 2. Remove three locknuts (41, washers (21, capscrews Cl), washers (21, and tailgate bracket (8) from shelter support assembly (3). Discard locknuts (4). b. Installation 1. Install tailgate bracket 03) on shelter support assembly (3) with three washers (21, capscrews (11, washers (21, and locknuts (4). Do not tighten capscrews (1). 2. Install washer (6), capscrew (51, washer (6), and locknut (7) on shelter support assembly (3) and tailgate bracket (8). Tighten locknut (71 to 65 lb-R (88 Nom). 3. Tighten capscrews (1) to 26 lb-R (35 N-m). FOLLOW-ON TASK: Install shelter carrier tailgate (para. 11-75). 1 l-135