TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 341 of 1555
11-67. RIFLE MOUNTING CLAMP REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 133) Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-24P Maintenance Level Unit TM 9-2320-387-24-2 11-128 Change 1 NOTE Perform step 1 and 2 for removal of left front rifle mounting clamp. Perform step 3 for removal of right front rifle mounting clamp. Perform step 4 for removal of right rear rifle mounting clamp. 1. Remove two screws (1.1) and clamp bracket (1) from turret support (4). 2. Remove two locknuts (2.1), screws (3), and clamp (2) from clamp bracket (1) and turret support (4). Discard locknuts (2.1). 3. Remove two locknuts (9), screws (7), and clamp (6) from clamp bracket (8) on radio rack (5). Discard locknuts (9). 4. Remove two locknuts (11), screws (14), and clamp (10) from clamp bracket (13) on B-pillar (12). Discard locknuts (11). NOTE Perform step 1 and 2 for installation of left front rifle mounting clamp. Perform step 3 for installation of right front rifle mounting clamp. Perform step 4 for installation of right rear rifle mounting clamp. 1. Install clamp (2) on clamp bracket (1) with two screws (3) and locknuts (2.1). 2. Apply sealing compound to threads of two screws (1.1) and install clamp bracket (1) on turret support (4) with screws (1.1). 3. Install clamp (6) on clamp bracket (8) and radio rack (5) with two screws (7) and locknuts (9). 4. Install clamp (10) on clamp bracket (13) and B-pillar (12) with two screws (14) and locknuts (11). b. Installation a. Removal LEFT SIDE FRONT 1 4 3 2.1 1.1 5 6 7 8 9 RIGHT SIDE REAR 10 11 13 12 RIGHT SIDE FRONT 14 2