TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 339 of 1555
11-66. RIFLE SUPPORT MAINTENANCE This task covers: a. Removal b. Installation a.1. Inspection INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 72.1) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-24P Maintenance Level Unit NOTE Perform step 1 for removal of left front rifle support. Perform step 2 for removal of right front rifle support. Perform step 3 for removal of right rear rifle support. 1. Remove capscrew (2) and rifle support (1) from floor tunnel (3). 2. Remove two capscrews (5) and rifle support (4) from right footwell (6). 3. Remove two capscrews (7) and rifle support (10) from bracket (9). Refer to para. 10-56 for plusnut (8) inspection and replacement. NOTE Perform step 1 for installation of left front rifle support. Perform step 2 for installation of right front rifle support. Perform step 3 for installation of right rear rifle support. 1. Apply sealing compound to threads of capscrew (2), and install rifle support (1) on floor tunnel (3) with capscrew (2). Tighten capscrew (2) to 68-82 lb-in. (8-9 N•m). 2. Apply sealing compound to threads of two capscrews (5), and install rifle support (4) on right footwell (6) with capscrews (5). Tighten capscrews (5) to 68-82 lb-in. (8-9 N•m). 3. Apply sealing compound to threads of two capscrews (7), and install rifle support (10) on bracket (9) with capscrews (7). Tighten capscrews (7) to 68-82 lb-in. (8-9 N•m). b. Installation a.1. Inspection a. Removal TM 9-2320-387-24-2 11-126 Change 1