TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 337 of 1555
11-64. COMMANDER’S CONTROL BOX MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove three locknuts (5), two washers (4), screw (1), two screws (2), and commander’s control box mounting bracket (6) from underside of radio rack (3). Discard locknuts (5). INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Three locknuts (Appendix G, Item 109) Manual References TM 9-2320-387-24P Maintenance Level Unit b. Installation Install commander’s control box mounting bracket (6) on underside of radio rack (3) with screw (1), two screws (2), washers (4), and three locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N•m). TM 9-2320-387-24-2 11-124 Change 1 1 3 2 2 4 5 6