TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 335 of 1555
TM 9-2320-387-24-2 I 1 l-63. INTERCOM AND BRACKETS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P MaintenanceLevel Unit p-iczz-1 1. Disconnect intercom cable (11) from intercom control (10). 2. Remove two nuts (17), washers (161, capscrews (12), washers (131, and intercom control (10) from intercom mounting bracket (6). 3. Disconnect cable (7) from audio amplifier (8). 4. Remove four nuts (31, washers (41, capscrews (9), washers (41, and audio amplifier (8) from intercom mounting bracket (6). 5. Remove two nuts (14), washers (15), capscrews (181, and washers (19) from intercom mounting bracket (6) and radio rack support (5). 6. Remove two nuts (201, washers (211, screws (21, and intercom mounting bracket (6) from radio rack (1). b. Installation 1. Install intercom mounting bracket (6) on radio rack support (5) with two washers (19), capscrews (181, washers (151, and nuts (14). 2. Install intercom mounting bracket (6) on radio rack (1) with two screws (2,), washers (211, and nuts (20). 3. Install audio amplifier (8) on intercom mounting bracket (6) with four washers (41, capscrews (91, washers (41, and nuts (3). Connect cable (7) to audio amplifier (8). 4. Install intercom control (10) on intercom mounting bracket (6) with two washers (13), capscrews (12), washers (161, and nuts (17). Connect intercom cable (11) to intercom control (10). 11-122