TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 325 of 1555
11-58. NIGHT VISION LID BUMPER AND BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Riveter tool kit (Appendix B, Item 123) Materials/Parts Two rivets (Appendix G, Item 349) Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-24P Maintenance Level Unit NOTE For replacement of rivets, refer to para. 10-56. 1. Remove two socket-head screws (2) and bumper (1) from night vision lid bumper bracket (5). 2. Remove two rivets (3) and night vision lid bumper bracket (5) from brush seal (4). 1. Install night vision lid bumper bracket (5) on brush seal (4) with two rivets (3). 2. Apply sealing compound to threads of two socket-head screws (2), and install bumper (1) on night vision lid bumper bracket (5) with socket-head screws (2). Tighten socket-head screws (2) to 68-82 lb-in. (8-9 N•m). b. Installation a. Removal TM 9-2320-387-24-2 11-112 Change 1 2 1 5 3 4