TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 319 of 1555
TM 9-2320-387-24-2 I 1 l-54. TURRET BACKREST REPLACEMENT I This taskcovers: a. Removal b. Installation INITIAL SETUP: ApplicableModels Ml114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts RTV sealant (Appendix C, Item 741 Manual References TM 9-2320-387-10. TM 9-2320-387-24P EquipmentCondition Turret door opened (TM 9-2320-387-102 Maintenance Level Unit 1 a. Removal 1 1. Remove two nuts (31, washers (4), and capscrews (1) from turret hatch door (9) and turret (2). 2. Remove capscrew W, washer (6), backrest (71, and spacer (8) from turret (21. -1 1. Apply sealant around screw mounting holes in turret hatch door (9). NOTE Apply sealant to capscrews prior to installation. 2. Install spacer (8) and backrest (7) on turret (2) with washer (6) and capscrew (5). Tighten capscrew (51 to 37 lb-ft (50 N-m). 3. Install two capscrews (11, washers (41, andnuts (3) on turret hatch door (91 and turret (2). Tighten capscrews (11 to 37 lb-R (50 Nom). 1 l-106