TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 317 of 1555

11-53. TURRET DOOR REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Turret backrest removed (para. 11-54). Maintenance Level Unit TM 9-2320-387-24-2 11-104 Change 1 1. Open turret hatch door (3) flat against turret (6). 2. Remove four nuts (7), washers (8), and capscrews (1) from turret door (3) and turret (6). 3. Remove nut (5), washer (4), and capscrew (2) from turret door (3) and turret (6). 4. Remove turret door (3) from turret (6). 1. Position turret door (3) on turret (6) and secure with capscrew (2), washer (4), and nut (5). Tighten capscrew (2) to 37 lb-ft (50 N m). 2. Install four capscrews (1), washers (8), and nuts (7) on turret door (3) and turret (6). Tighten cap- screws (1) to 37 lb-ft (50 N m). b. Installation a. Removal