TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 315 of 1555
TM 9-2320-387-24-2 1 l-51. TURRET ARMOR BRUSH SEAL REPLACEMENT This task covers: a. Removal INITIAL SETUP: b. Installation ApplicableModels Ml114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Riveter tool kit (Appendix B, Item 123) Materials/Parts Twenty-eight rivets (Appendix G, Item 351) RTV sealant (Appendix C, Item 74) Manual References TM 9-2320-387-24P EquipmentCondition l Turret pintle mount removed (para. 11-62). l Night vision lid bumper bracket removed (para. 11-58). Maintenance Level Unit 1 a. Removal 1 NOTE l Note brush seals location for installation. l For replacement of rivets, refer to para. 10-56. Remove twenty-eight rivets (1) and two brush seals (3) from turret armor (2). b. Installation 1. Apply a small amount of sealant to brush seal mount holes (4). NOTE Ensure two rivet holes are left open for night vision lid bumper bracket. 2. Position two brush seals (3) on turret armor (21 and install twenty-eight rivets (1) (leave two rivet holes (5) open). 3. Seal butt joints of brush seals (3) with sealant. FOLLOW-ON TASKS: l Install turret pintle mount (para. 11-62). l Install night vision lid bumper bracket (para. 11-58). 1 I-102