TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 309 of 1555
11-48. FIREWALL ARMOR MAINTENANCE This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition • Hood raised and secured (TM 9-2320-387-10). • Left front firewall cowl armor removed (para. 11-49). Maintenance Level Unit TM 9-2320-387-24-2 11-96 Change 1 1. Remove capscrew (3) and left front firewall armor (1) from body (2). 2. Remove two capscrews (5) and right side firewall armor (4) from body (2). 3. Remove two capscrews (7) and center firewall armor (6) from body (2). Refer to para. 10-56 for plusnut inspection and replacement. NOTE Apply sealing compound to capscrews prior to installation. 1. Install center firewall armor (6) on body (2) with two capscrews (7). Tighten capscrews (7) to 68-82 lb-in. (8-9 N • m). 2. Install right side firewall armor (4) on body (2) with two capscrews (5). Tighten capscrews (5) to 68-82 lb-in. (8-9 N • m). 3. Install left front firewall armor (1) on body (2) with capscrew (3). Tighten capscrew (3) to 68-82 lb-in. (8-9 N • m). c. Installation b. Inspection a. Removal 2 3 1 ~