Sign up to sell your inventory with NSN Lookup

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 304 of 1555

11-44. B-PILLAR ARMOR REPLACEMENT (Cont’d) FOLLOW-ON TASK: Install rear door and hinge (para. 11-2.1). TM 9-2320-387-24-2 Change 1 11-91 3. Install B-pillar armor (1) on B-pillar back-up armor (2) with two capscrews (17) and locknuts (4). Tighten locknuts (4) to 10 lb-ft (13 N • m). 4. Install three capscrews (16), washers (10), shims (11) and (11.1), and three locknuts (9) on B-pillar armor (1) and bracket (8). Tighten locknuts (9) to 51 lb-ft (69 N • m). 4.1. If new spacer (13) is installed, it will be necessary to match-drill two 17/64-in. (6.7 mm) diameter holes through B-pillar armor (1) and B-pillar back-up armor (2) into spacer (13). 5. Install B-pillar armor (1) on B-pillar back-up armor (2) with two rivets (15). 6. Seal top of B-pillar armor (1) with adhesive. 1 2 3 ~ 10 11 16 17 14 13 12 ~ 15 MATCH-DRILL 17/64-IN. (6.7 MM) DIAMETER HOLES (2 PLACES) 5 4 6 7 9 11.1 8