TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 301 of 1555
11-43. A-BEAM RIGHT SIDE ARMOR REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Riveter tool kit (Appendix B, Item 123) Materials/Parts Sealing compound (Appendix C, Item 72.1) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-24P Equipment Condition • Right front door removed (para. 11-2). • Right front underbody armor removed (para. 11-38). Maintenance Level Unit TM 9-2320-387-24-2 11-88 Change 1 1. Remove two capscrews (7) and washers (8) from body (5) and A-beam armor (4). 2. Remove five capscrews (1), A-beam armor (4), and spacers (3) and (9) from right side footwell outer armor (2) and A-beam (6). 1. Apply sealing compound to threads of five capscrews (1), and install spacers (3) and (9) and A-beam armor (4) on right side footwell outer armor (2) with capscrews (1). Tighten capscrews (1) to 37 lb-ft (50 N • m). 2. Apply sealing compound to threads of two capscrews (7), and install A-beam armor (4) on A-beam (6) and body (5) with two washers (8) and capscrews (7). Tighten capscrews (6) to 37 lb-ft (50 N•m). b. Installation a. Removal