TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 30 of 1555
TM 9-2320-387-24.2 10-9. HOOD AND HINGE MAINTENANCE (Cont’d) 1 2. Remove two cotter pins (41, washers (61, hinge pins (161, and washers (15) from upper hinge halves (14) and lower hinge halves (11). Discard cotter pins (4). 3. Remove cotter pin (201, washer (211, hood prop rod (231, and washer (22) from hood (19). Discard cotter pin (20). 4. Remove hood (19). NOTE l Perform steps 5 and 6 if replacing hinges. l Note position of hinge halves prior to removal for installation. 5. Remove four locknuts (31, washers (18), capscrews (121, washers (13), and two upper hinge halves (14) from hood brackets (17). Discard locknuts (3). (7), and two lower hinge halves (1 6. Remove four locknuts (9), washers (lo), capscrews (51, washers from headlight housing (8). Discard locknuts (9). 1)