TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 294 of 1555
NOTE If new passenger side footwell outer armor is being installed, perform 11-38.1. NOTE Note location of capscrews, nuts, and spacers for installation. 1. Remove six locknuts (11), spacers (12), and capscrews (1) from footwell armor (2) and outer cowl (7). Discard locknuts (11). 2. Remove twenty-four locknuts (9) and capscrews (5) from footwell armor (2), A-pillar armor (4), and outer cowl (7). Discard locknuts (9). 3. Remove four capscrews (10) from footwell armor (2) and A-beam armor (6). 4. Remove nut (12.2) and capscrew (12.1) from footwell armor (2). 5. Remove capscrew (13), footwell armor (2), and spacers (3) and (8) from outer cowl (7). Refer to para. 10-56 for plusnut inspection and replacement. 1. Apply sealing compound to threads of four capscrews (10) and install spacer (8) and footwell armor (2) on A-beam armor (6) with capscrews (10). Tighten capscrews (10) to 37 lb-ft (50 N•m). 1.1. Install capscrew (12.1) and nut (12.2) on footwell armor (2). 2. Apply sealing compound to threads of capscrew (13) and install spacer (3) and capscrew (13) on footwell armor (2) and A-pillar armor (4). Tighten capscrew (13) to 37 lb-ft (50 N•m). 3. Install twenty-four capscrews (5) and locknuts (9) on footwell armor (2), A-pillar armor (4), and outer cowl (7). Tighten locknuts (9) to 37 lb-ft (50 N•m). c. Installation b. Inspection a. Removal 11-41.1. PASSENGER SIDE FOOTWELL OUTER ARMOR REPLACEMENT This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Thirty locknuts (Appendix G, Item 169) Sealing compound (Appendix C, Item 72.1) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-24P Equipment Condition • A/C heater/evaporator assembly removed (para. 25-21). • Right front cowl insulation removed (para. 10-32). Maintenance Level Unit TM 9-2320-387-24-2 11-84.2 Change 1