TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 290 of 1555
11-40.1. LEFT FOOTWELL OUTER ARMOR INSTALLATION This task covers: Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive Special Tools Rivet tool kit (Appendix B, Item 2) Materials/Parts Thirty-two locknuts (Appendix G, Item 178) Sealing compound (Appendix C, Item 72.1) Four locknuts (Appendix G, Item 178) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-24-2 TM 9-2320-387-24 Equipment Condition Driver’s footwell outer armor removed (para. 11-40). 11-82.2 Change 1 1. Install new driver’s side footwell outer armor (5), and spacer (6) and secure left A-beam armor (1) with six capscrews (7). Tighten capscrews (7) to 35 lb ft. (47 N•m). 2. Drill one 13/32 in. hole from A-pillar armor (1) through driver’s side footwell outer armor (5). 3. Install one capscrew (2) and locknut (3) through A-pillar armor (1) and driver’s side footwell outer armor (5). Tighten locknuts (3) to 35 lb ft. (47 N•m). 4. Match drill 25 13/32 in. holes from A-pillar armor (1) and driver’s side footwell outer armor (5). 5. Install 12 capscrews (2) and locknuts (3) through A-pillar armor (1) and driver’s side footwell outer armor (5). Tighten locknuts (3) to 35 lb ft. (47 N•m). Installation TM 9-2320-387-24-2