TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 26 of 1555
Change 1 10-11 TM 9-2320-387-24-2 10-7. HOOD LATCH TAPPING BLOCK REPLACEMENT This task covers: a. Removal b. Installation Equipment Condition • Hood latch removed (para. 10-5). • Side hood stop removed (para. 10-11). Maintenance Level Unit NOTE For instructions on replacement of rivets, refer to para. 10-56. Remove two rivets (2) and tapping block (1) from body (3). 1. If new tapping block (1) is being installed, drill two 3/16-in. (4.8-mm) diameter rivet holes (4) through body (3) and tapping block (1). 2. Install tapping block (1) on body (3) with two rivets (2). b. Installation a. Removal INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P FOLLOW-ON TASKS: • Install side hood stop (para. 10-11). • Install hood latch (para. 10-5). 1 2 ~ 3 4 4