TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 252 of 1555
TM 9-2320-387-24-2 1 l-3 1. CARGO SHELL DOOR LINER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: elicable Models Ml114 TOOIS ?&era1 mechanic’s tool kit: automotive (Appendix B, Item Materials/Parts Twelve clips (Appendix G, Item Personnel Required One mechanic One assistant ManualReferences TM 9-2320-387-10 TM 9-2320-387-24P 1) EquipmentCondition Rear end of cargo shell door raised (TM 9-2320-387-10). 23) Maintenance Level Unit 1. Remove ten screws (6), washers (5), clips (4), and two retainers (7) from cargo shell door (1). 2. Remove twelve fastener clips (8) from liner (3) and door (1). Discard fastener clips (8). 3. Remove liner (3) and three sound dampeners (2) from door (1). 4. Clean cargo door (1) to remove adhesive. -1 1. 2. 3. 4. Position three sound dampeners (2) on door (1). Place four fastener clips (8) in two top and two bottom holes of liner (3). Ensure heads of fastener clips (8) are on side of liner (3) without adhesive. Peel paper backing (9) from liner (3). Align liner (3) with door (l), ensuring top and bottom fastener clips (8) in liner (3) align with top and bottom holes in door (l), and install liner (3) on door (1) with top and bottom fastener clips (8). Press entire surface of liner (3) to ensure adhesion. 5. Install eight remaining fastener clips (8) through liner (3) into door (1). 6. Install two retainers (7) on door (1) with ten clips (4), washers (5), and screws (6). NOTE Ensure surface is free of dirt and oil before applying adhesive backing. 11-56