TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 242 of 1555
11-23. CARGO SHELL DOOR STRAP MAINTENANCE This task covers: a. Removal b. Installation a.1 Inspection INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Two screw-assembled lockwashers (Appendix G, Item 370) Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-387-10). Maintenance Level Unit 1. Remove two screw-assembled lockwashers (3), footman loop (2), and strap (1) from cargo door (4). Discard screw-assembled lockwashers (3). 2. Remove capscrew (6), washer (5), and strap (1) from left gas spring mounting bracket (7). Refer to para. 10-56 for plusnut inspection and replacement. NOTE To assist closing cargo shell door, a grab loop may be added. Refer to appendix D, fig. D-42. 1. Apply sealing compound to threads of capscrew (6), and install strap (1) on left gas spring mounting bracket (7) with washer (5) and capscrew (6). Tighten capscrew (6) to 75 lb-in. (8 N•m). 2. Install strap (1) and footman loop (2) on cargo door (4) with two screw-assembled lockwashers (3). Tighten screw-assembled lockwashers (3) to 21 lb-in. (2 N•m). b. Installation a.1. Inspection a. Removal FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-387-10). TM 9-2320-387-24-2 11-46 Change 1 1 2 3 4 1 6 7 5