TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 230 of 1555
TM 9-2320-387-24-2 1 l-1 8. CARGO SHELL DOOR LATCH MAINTENANCE_ This taskcovers: a. Removal b. Installation c. Adjustment INITIAL SETUP: ApplicableModels Ml114 TOOIS General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Three lockwashers (Appendix G, Item 206) Pushnut (Appendix G, Item 312) Manual References TM 9-2320-387-10 TM 9-2320-387-24P EquipmentCondition Rear end of cargo shell door raised (TM 9-2320-387-10). Maintenance Level Unit p7cEz-l I. Remove pushnut (6), rod end clip (71, and rod (8) from door latch (41. Discard pushnut (6). 2. Remove three nuts (11, lockwashers (2), capscrews (51, and door latch (4) from cargo door (3). Discard lockwashers (2). b. Installation Install door latch (4) on cargo door (3) with three capscrews (51, lockwashers (21, and nuts (1). Finger- tighten nuts (1). c. Adjustment 1. Loosen three nuts (1) on door latch (4) and cargo door (3). 2. Close cargo door (3), ensuring latches (4) are fully engaged on door striker pins (9). 3. Tighten three nuts (1) to 17 lb-R (23 N-m). 4. Open cargo door and install rod (8) on latch (4) with rod end clip (7) and pushnut (6). FOLLOW-ON TASKS: l Lubricate door latch (TM 9-2320-387-10). l Check cargo shell door for proper operation (TM 9-2320-387-10). 1 l-35