TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 23 of 1555
TM 9-2320-387-24-2 10-8 Change 1 10-5. HOOD LATCH MAINTENANCE (Cont’d) Install hood latch (11) on latch (10) with two rollers (9), pin (8), and cotter pin (1). NOTE • If only rubber latch is to be replaced, spring pin may not be completely out of base. • M1114 vehicles are equipped with plusnuts/tapping blocks instead of nuts and washers. Apply sealing compound to threads of capscrews for M1114 vehicles only. 1. Install latch (10) on base (7) with spring pin (2). 2. Install base (7) on body (5) with two washers (4), capscrews (3), washers (4), and locknuts (6). Tighten capscrews (3) to 6 lb-ft (8 N•m). d. Installation c. Assembly FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). 1 2 3 4 5 4 6 7 8 9 10 11 9